Seven steps to operate CNC punching machine
2021-10-13
Seven steps to operate CNC turret punching machine
1. The mold closure must be carefully checked before the mold is installed, and the mold can be installed within the allowable range of the travel stroke of the punch to make it used within the specified safety range.
2. Open the compressed air valve (or oil pump) before turning on the friction wheel motor during equipment startup.
3. When using friction pressure in forging, forging workers must be trained in operation.
4. Pay attention to whether the oil pump pressure and air compression are normal at all times during normal work
5. Strictly check the vertical head positioning device before the machine runs, whether the mold is loose and whether the buffer is in good condition, etc.
6. The flywheel rotation does not allow punch adjustment or mold installation and other irrelevant matters.
7. When the work is finished, close the punches in sequence and fall down steadily.
