Reasons for the dislocation of CNC punching machine

The reasons for the dislocation of the CNC punch are: the lower die is too high, the raw material is deformed, the die is not penetrated, the material is pulled, and the accuracy of the machine tool decreases.
 
The treatment methods of CNC punching machine dislocation are as follows:
⑴The punching die has the same height as other dies; the special forming die can be processed by disassembly and assembly methods.
⑵The deformation of the raw material can be rejected, or cut into small pieces of side material before production.
⑶ The lower mold of the mold is too low and the height is not enough to cut through when punching. The height of the upper and lower molds should be re-adjusted.
⑷The machine and bearings need to be maintained regularly, and the pin holes of the cutter head need to be cleaned.